This post is the final in this series from a very productive shoot at the wildlife refuge in New Mexico. The refuge is a very target rich environment for making bird images. The scenery wasn’t bad either! Let’s talk about creativity just a bit more. I saw a lot of photographers while I was there. And except for gear difference such as long lenses, I believe most photographers there were getting pretty much the same photo.
Why would I say that? Check out the photo below of the scene at almost every location in the refuge. What do you see?
Take a careful look. Every camera is at the photographer’s eye level.
I saw this ALL the time. To obtain a different look to your images, you need to look at things from a different viewpoint. I spent a fair amount of time on my knees, sitting on my butt and getting the camera off of the tripod. Look back through my past posts, and I think you’ll see lots of variety. Bosque Pt 1Bosque Pt 2Bosque Pt 3Bosque Pt 4Changing the height that you shoot from can have a dramatic effect on what is in the background of your subject.
I also heard a lot of motor drives at 8-15 frames per second going off. Motor drives can be helpful when tracking moving subjects or quickly changing background and lighting conditions, but I would see that happening when a photographer was shooting a relatively stable subject in constant light. Save yourself from extra editing time on the computer, Turn off the motor drive when you don’t need it.
Taking a lower angle allowed for the reflection with the grassland environment in the background.
Had to be on my knees to get the composition of the reflection where I wanted it placed.
Generally, a gimbaled tripod head would be needed to capture solid images of birds in flight. With new gear and in-camera stabilization improvements, more creativity is possible. The Sandhill Crane images were captured handheld with the Lumix GX85 and the Lumix 100-400mm lens (200-800 35mm equivalent) lens fully extended.
Excited about possibilities as I push this camera and lens combo even further.
See what you can do to differentiate your images from others at every chance you get.
The refuge is quite beautiful in and of itself even without the birds. I made sure to capture images of the landscape as a subject all of its own. Here are a few scenes from the area.
Even though there are Cranes in the foreground, this is more about the landscape than the birds. Made with the in-camera panorama feature of the Lumix GX85.
Sunrise just after the Sandhill Cranes made their ascent leaving the pond for the day to forage in the cornfield.
Lots of layers in this landscape.
Reflection in the bend.
Reflections of sunrise among the grasses help tell the story of the environment.
I always try to tell the complete story of an area even if the main reason for the trip, in this case, was for the Sandhill Cranes and other wildlife of the Bosque del Apache.
Yesterday I shared a time-lapse video shot and processed with my Lumix GX8 and Adobe Premiere Pro.
While those frames were being recorded I used the GX85 to photograph some still images. Here are a couple in-camera panoramas. Cameras are becoming more like portable imaging computers with each new release.
Stitched in-camera Sedona pano. Hwy 179. The camera is held in the vertical orientation to give a slightly taller image. If there was lots of cloud action I would have taken a second pano and stitched them together in Photoshop for an even taller rendition of the scene.
The field of view depends on how long you continue to pan. A longer panning time gives a different aspect ratio.
Here’s a tip for creating smooth panorama photos with clean stitching. This is an old videographer’s trick. Point your body and feet to where you would like the panorama to end. Then using your stomach muscles turn back to the starting point of the image. Make sure the camera is tight against your forehead and is not tilted. Then using your stomach muscles gently pivot to the end of the field of view. The stomach muscles are larger and more stable giving you a smoother movement resulting in less stitching errors. One final note, there is a preview of your capture in the viewfinder. You will want to go a little bit further than you see or your image will be truncated just a bit. If you are moving too fast or too slow or the light is too low, the camera will return an error message.
Of course as the sun begins to set colors can change immensely
And of course, don’t forget to turn around. This is the back side of Cathedral Rock in silhouette.
Our creative tools are getting better and better. It’s a fun time to be an image maker.
While out waiting for the moon to make its appearance the night before the Supermoon I worked a couple of cameras. I set up the Lumix GX8 to do a time-lapse of the sunset/moonrise. Glad that I also had the Lumix GX85 as a second camera to mess about with while the time-lapse was being recorded.
Here’s a still I pulled for the time lapse sequence.
The time-lapse was pretty simple. The settings are available in the camera. No need for an intervalometer. Under the Time Lapse Shot menu, you have the choice of Start time which can be immediately (now) or a time set in the future. Shooting Interval which is the amount of time between frame captures. Image Count which is the number of frames to be captured. In this case, I fired one frame every four seconds.
I thought I had a better position for the moonrise which was quite a bit to the right of where it actually showed up. I stopped the captures pretty early after the moon made its appearance. Looks like I need to calibrate my compass.
I was able to add some interest because I choose to have the camera process the still images to a 4K video. 4K video enables you to move around in the image without losing quality which I did in Adobe Premiere. Did you catch that part about the camera processing the time-lapse? A very cool feature. I choose the output settings including quality and frames per second. In this case, I used twenty-four.
For the video below I changed the output settings to 12 frames per second. I did a little color correction and added movement in Adobe Premiere.
Tomorrow I’ll show you what I was photographing with the Lumix GX85.
Last week I showed you some night sky photography with some stills blended together. When shooting night skies getting some detail into the foreground takes a bit of work when you are shooting in a dark skies compliant area like Sedona, Arizona. While I was capturing those images with my Lumix GX85 I set up the Lumix GX8 on a tripod for a time lapse sequence.
The lens was the Vario 12-35mm f2.8 set at f2.8. ISO 200 and 30-second exposures. I set the interval to 32-seconds to give the camera a little time to reset. Noise reduction setting was disabled as the camera would have been taking an extra 30 seconds to create the noise reduction for each image. Way too long for what I was trying to do. Using the camera’s processing I was able to make videos at various settings without any problems at all. Here is a minute and a half video showing all of the results including an edit with Photoshop.
Stars are making a circle around the north star. Funny how they twinkle just as they do when you are looking at them live.
Time Lapse Video of 140 images processed in-camera at twenty-four, twelve , eight and four frames per second. I also processed the images in Adobe Photoshop using the timeline to create a ten frames per second video.
One note. I was able to take the RAW files into Photoshop and process the red rock area different than the sky area which allows more detail and color to be in the final video. All the files were imported into Adobe Premiere and resized, captioned and rendered to HD. The videos I made in-camera were processed out as 4K files which gives more possibilities in the final movie. I could have left them large and then had the possibility of movement like panning or zooming through the video to create even more interest.
Here is a still image processed from the same scene. A one second and a thirty-second exposure blended with extra process in MacPhun’s Intensify CK
Thought I’d give the red rocks under the night sky a shot. We have dark skies ordinances in Sedona and the Village of Oak Creek. Add to that the undeveloped land under the Park Service and State Parks the stars can shine.
It was a new moon night, and the clouds had parted for places unknown. It was a very clear night. When the cat woke me up, I decided to run out and see what I could do with the new Lumix GX85. I added the 15mm f1.7 lens and started taking multiple exposures for combining later in post-production. There are all kinds of rules for focusing properly and how long your exposures can be before the stars start to move and streak during your exposure depending on lens choice. I’m not going to share that part cause some photographers have been doing night photography much longer than I. A bit of searching on the web can get you that info. After I have practiced more, I’ll share some of that information after I’ve tested more.
Castle Rock in the Village of Oak Creek, Sedona, AZ
Courthouse Butte Looking north. I will share time-lapse video sequences captured by the GX8 in a future post.
Both images were made with multiple exposures layered together using Adobe Photoshop.
It’s a new world for me to play in.
Now all I have to do is be able to stay awake overnight!
For infrared conversion of my cameras I use LifePixel. Infrared allows you to put an older camera to use and opens up a new time time of day for productive image creation.
Fotopro tripods are well worth checking out. You can learn about the ones I use and recommend by clicking on the Fotopro Tripods link at the top of this page. If you want to see what other tripods might fit your needs check out the Fotopro.com website. Check back with me before you buy as a Fotopro Ambassador I’m able to get you discounted pricing including complementary continental USA shipping for my followers that you won’t find through retail outlets.
Learn Photoshop in a fun environment. Aaron Nace applies the right amount of fun with easy to understand and follow tutorials. Actions and brushes are included with lessons!
Lightning, waterdroplets, sound, time-lapse, HDR sequences, smiles and much more control for your camera!
Cameras Get Smarter -
A High Speed Smart Camera Remote
Best embroidery ever. Give Queensboro a try, get a $20 instant credit to get started by clicking on the logo! They specialize in great quality custom logo apparel and promotional products with the best customer service.
Platypod has become a great resource for being creative in getting your camera gear easily into unusual places. As an Platypod Pro I get to work/play with the gear even before it comes out. Head over to Platypod, subscribe to the newsletter and you will get special discounts reserved only for subscribers.
Taking a lower angle allowed for the reflection with the grassland environment in the background.
Had to be on my knees to get the composition of the reflection where I wanted it placed.
Generally, a gimbaled tripod head would be needed to capture solid images of birds in flight. With new gear and in-camera stabilization improvements, more creativity is possible. The Sandhill Crane images were captured handheld with the Lumix GX85 and the Lumix 100-400mm lens (200-800 35mm equivalent) lens fully extended.
